BMW/MINI PROFESSIONAL MULTI-SYSTEM CAR DIAGNOSTIC TOOL BMM V2.0 FROM ICARSOFT

PRODUCT FEATURES

1.iCarsoft BMM V2.0 can do it all-reads and clears trouble codes on most of the systems
such as engine, transmission, ABS and airbag etc.
2.Support OBDII/EOBD Ten Modes of Operation
3.Read Live Data
4.Full ECU Diagnosis
5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6.Easy To Use With Silicone Keys
7.Oil Light/Service Reset: Support service lamp reset.
8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the
EPB system for replacement and initialization.
9.Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration
process while DPF blockage and turn off the DPF indicator.
11.Electronic Throttle Control system (ETC) relearns the throttle va value while clear or
replaces the throttle valve.
12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to
straight ahead, or recalibrates SAS while steering part replacement.
13.ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
14.Injector coding, relearn the injector control parameter while the injector renewed or replaced
15.The Print Data function allows you printing out diagnostic data recorded by the scan
16.Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
17.DTC Library to lookup when user is operating this tool.
18.Upgrade Via PC
19.Multi-language: English, German, Dutch, Spanish, French.

EIGHTEEN SUPER ADVANTAGES

▪Diagnose Single Brand of most Models (OBDII-16DLC)
▪Full System Diagnosis       ▪Support Oil Service Reset
▪Electronic Parking Brake (EPB) system maintenance
▪Battery Management System (BMS)
▪Diesel Particulate Filter (DPF) Regeneration Control System
▪Electronic Throttle Control System (ETC)
▪Steering Angle Sensor (SAS) Calibration
▪ABS Bleeding(some vehicles do not enjoy this function)
▪Injector Coding(some vehicles do not enjoy this function)

▪Read &Clear DTC
▪Read Live Data
▪Support Battery Test
▪Support Data Review and Print
▪Full Speed Upgrade via PC
▪4.0″ TFT LCD, 480*320 Pixels
▪Support Multi-Language

OBDII FUNCTION

1. Read Codes
   2. Erase Codes
   3. I/M Readiness -- I/M Readiness indicate whether or not the
   various emissions-related systems on the vehicle are operating
   properly and are ready for Inspection and Maintenance testing.
   4. Data stream.
   5. Freeze Frame -- When an emission-related fault occurs,
   certain vehicle conditions are recorded by the on-board
   computer. This information is referred to as freeze frame
   data. Freeze Data is a snapshot of the operating
   conditions at the time of an emission-related fault.
   6. O2 Sensor Test -- This option allows retrieval
   and viewing of O2 sensor test results for most recently
   performed tests from the vehicle's on-board computer.
   7. On-Board Monitoring -- This function can be utilized
   to read the results of on-board diagnostic monitoring
   tests for specific components/systems.
2. 8.Evap System Test -- The EVAP test function lets
   you initiate a leak test for the vehicle's EVAP system.
   Before using the system test function, refer to the vehicle's
   service repair manual to determine the procedures
   necessary to stop the test.
   9. Vehicle Information -- The option displays the vehicle identification
   number (VIN), the calibration verification number (CVN), and other
   information of the test vehicle.
   10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific
   (P1, P3, and U1) codes and pending codes
   11.Turn off Check Engine Light (MIL), clear cod-es and reset monitors
   12. Read live PCM DataStream
   13. Support CAN (Controller Area Network) and all other
   14. Multilingual menu and DTC definitions English, Spanish, and German, etc.
   15.Read pending DTCs
   16. Read permanent DTCs
   17. DTCs search
   18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000,
   J1850 VPW and J1850 PWM.
   19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
   20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
   21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
   22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better
   graphing and live data readings.
   23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

OPTIONAL ACCESSORIES

OBD-16 to BMW-20 Socket This socket is use to test the BMW vehicle between 1997 to 2000）

Note: The wiring diagram for the 20PIN adaptor must be the same with the  wiring diagram of the iCarsoft products' port.Otherwise it may not be  compatible with our products even when the apperance is the same. We suggest  that you purchase this adaptor from iCarsoft.

SPECIFICATIONS

▪ Display: 4.0″ TFT LCD, 480*320 Pixels
▪ Operation Temperature: 0°C ~ 50°C
▪ Storage Temperature: -20°C ~ 70°C
▪ Operating Voltage: 9 ~ 18V
▪ Operating Current: 150mA@12V(Typical)
▪ Power Consumption: 1.8W (Typical)
▪ Dimension: 206*104.1*32.6 mm (L x W x H)