iCarsoft VOL V2.0 for Volvo/Saab

FOR VOLVO/SAAB +OIL RESET
+EPB+BMS+DPF+SAS+ETC+BLD+INJ+OBDII

iCarsoft VOL V2.0 is a Professional and
powerful vehicle fault diagnosis tool for VOLVO/SAAB developed by iCarsoft
Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it
features full ECU diagnosis of single vehicle brand and test modes mainly
include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose
complex problems.

PRODUCT FEATURES

1. iCarsoft VOL V2.0 can do it all-reads and clears trouble codes on
most of the systems such as engine, transmission, ABS and airbag etc.

2.Support OBDII/EOBD Ten Modes of Operation

3.Read Live Data

4.Full ECU Diagnosis

5.Applies to the single Brand of most of
the Models which equipped with OBDII-16 DLC

6.Easy To Use With Silicone Keys

7.Oil Light/Service Reset: Support service
lamp reset.

8.Electronic Parking Brake (EPB) system
maintenance deactivates and reactivates the EPB system for replacement and
initialization.

9.Battery Management System (BMS),
registers new battery to the BMS while battery replacement.

10.Diesel Particulate Filter (DPF)
regeneration control system, requests the DPF regen-eration process while DPF
blockage and turn off the DPF indicator.

11.Electronic Throttle Control system (ETC)
relearns the throttle va value while clear or replaces the throttle valve.

12.SAS: Steering Angle Sensor (SAS)
calibration, calibrates the steering wheel to straight ahead, or recalibrates
SAS while steering part replacement.

13.ABS Bleeding, release the air to restore
ABS Brake sensitivity, or relearn while ABS replaced.

14.Injector coding, relearn the injector
control parameter while the injector renewed or replaced

15.The Print Data function allows you
printing out diagnostic data recorded by the scan

16.Battery test allows you getting the
voltage of battery with OBD port by the scan tool when the engine starts.

17.DTC Library to lookup when user is
operating this tool.

18.Upgrade Via PC

OBDII FUNCTION

1. Read Codes

2. Erase Codes

3. I/M Readiness -- I/M Readiness indicates
whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.

4. Data Stream

5. Freeze Frame -- When an emission-related
fault occurs, certain vehicle conditions are recorded by the on-board computer.
This information is referred to as freeze frame data. Freeze Data is a snapshot
of the operating conditions at the time of an emission related fault.

6. O2 Sensor Test -- This option allows
retrieval and viewing of O2 sensor test results for most

recently performed tests from the vehicle '
s on-board computer.

7. On-Board Monitoring -- This function can
be utilized to read the results of on-board diagnostic

monitoring tests for specific
components/systems.

8. Evap System Test -- The EVAP test
function lets you initiate a leak test for the vehicle's EVAP system. Before
using the system test function, refer to the vehicle's service repair manual to
determine the procedures necessary to stop the test.

9. Vehicle Information -- The option
displays the vehicle identification number (VIN), the calibration verification number
(CVN), and other information of the test vehicle.

10.Retrieve generic (P0, P2, P3, and U0),
manufacturer specific (P1, P3, and U1) codes and pending codes

11.Turn off Check Engine Light (MIL), clear
codes and reset monitors

12. Read live PCM datastream

13. Support CAN (Controller Area Network)
and all other

14.Multilingual menu and DTC definitions-
English, Spanish, and German, etc

15.Read pending DTCs

16.Read permanent DTCs

17. DTCs search

18. Supports most of the OBDII/EOBD test
modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

19. Works on most of 2001 and later OBDII
compliant PETROL European vehicles

20. Works on most of 2004 and later OBDII
compliant DIESEL European vehicles

21. Works on most of 1996 and later OBDII
compliant US and Asian vehicles

22. View & Graph Live Data in Color
Graphing and blazing fast refresh rate for better graphing and live data
readings.

23. Comprehensive Help, Including OBD
Parameter, Mode Explanations & More.

SPECIFICATIONS

▪ Display: 4.0″ TFT LCD, 480*320 Pixels

▪ Operation Temperature: 0°C ~ 50°C

▪ Storage Temperature: -20°C ~ 70°C

▪ Operating Voltage: 9 ~ 18V

▪ Operating Current: 150mA@12V(Typical)

▪ Power Consumption: 1.8W (Typical)

▪ Dimension: 206*104.1*32.6 mm (L x W x H)